Accelerator Pedal Position Sensor: Service and Repair

Accelerator Pedal Position Sensor Replacement

Removal Procedure




1. Remove the left instrument panel (I/P) sound insulator.
2. Disconnect the body harness electrical connector (1) from the accelerator pedal position (APP) sensor.




3. Remove the accelerated pedal nuts.
4. Remove the accelerator pedal.

Installation Procedure




1. Install the accelerator pedal.

Notice: Refer to Fastener Notice.

2. Install the accelerated pedal nuts.

Tighten the nuts to 10 N.m (89 lb in).




3. Connect the body harness electrical connector (1) to the APP sensor.
4. Install the left I/P sound insulator.