Removal and Replacement

Steering Wheel Position Sensor Replacement

Removal Procedure




Caution: Refer to Restraint System Service Precautions in Service Precautions.

1. Disable the SIR system.
2. Remove the steering column from the vehicle.
3. Remove the following from the steering shaft:

1. The boot seal (5)
2. The steering shaft seal (4)
3. The sensor retainer (3)
4. The sensor locator (2)

4. Remove the steering wheel position sensor (1).

Installation Procedure




1. Install the following onto the steering shaft:

1. The steering wheel position sensor (1).
2. The sensor locator (2)
3. The sensor retainer (3)
4. The steering shaft seal (4)
5. The boot seal (5)

2. Install the steering column into the vehicle.
3. Enable the SIR system.