Intermediate Steering Shaft Replacement

Intermediate Steering Shaft Replacement

Removal Procedure

1. Remove the steering column with the intermediate shaft attached.
2. Remove the intermediate steering shaft boot.




3. Remove the intermediate shaft pinch bolt at the steering column.
4. Remove the intermediate steering shaft.

Installation Procedure




1. Install the intermediate steering shaft to the steering column.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the pinch bolt to the power steering gear stub shaft.

Tighten the power steering gear pinch bolt to 47 N.m (35 lb ft).

3. Install the intermediate shaft boot.
4. Install the steering column with the intermediate shaft attached.