Accumulator Housing Disassemble

Accumulator Housing Disassemble




1. Remove the following parts:

* The two snap rings (349) from the top side of the accumulator housing (944)
* The 1-2 accumulator assembly (968-970, 973)
* The 3-4 accumulator assembly (975-977, 950)

2. Inspect the accumulator pistons for scratches or damage. Inspect the accumulator piston pins for scoring.




3. Remove the following parts:

* The five 8-mm cover bolts (966)
* The accumulator housing cover (965)
* The gasket (964)
* The forward accumulator assembly (960-963)
* The reverse accumulator assembly (946-949)

4. Inspect the accumulator pistons (946, 960) and the accumulator piston pins (948, 962) for scoring or damage.