B2976

DTC B2976

DTC DESCRIPTOR

DTC B2976 00

Driver Door Ajar Circuit

DIAGNOSTIC FAULT INFORMATION






IMPORTANT: Always perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Initial Inspection and Diagnostic Overview

CIRCUIT/SYSTEM DESCRIPTION
When the driver door lock is in to the AJAR position, ground is applied through the switch to the body control module (BCM). The BCM then sends a class 2 message to the instrument panel cluster to illuminate the ajar indicator.

CONDITIONS FOR RUNNING THE DTC
The ignition is ON.

CONDITIONS FOR SETTING THE DTC
The BCM receives a voltage signal on the driver door ajar circuit.

ACTION TAKEN WHEN THE DTC SETS
The Ajar indicator is on at all times.

CONDITIONS FOR CLEARING THE DTC
The BCM clears this code from current when the fault is removed from the system.