Engine Lift Bracket Replacement
Engine Lift Bracket Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the transaxle brace lower bolt.
3. Lower the vehicle.
4. Remove the transaxle brace nuts.
5. Remove the engine lift bracket studs.
6. Remove the engine lift bracket.
Installation Procedure
1. Position the engine lift bracket to the cylinder head.
Notice: Refer to Fastener Notice.
2. Install the engine lift bracket studs.
Tighten the studs to 50 N.m (37 lb ft).
3. Install the transaxle brace onto the lift bracket studs.
4. Install the transaxle brace nuts until sung.
5. Raise the vehicle.
6. Install the transaxle brace bolt.
Tighten the bolt to 50 N.m (37 lb ft).
7. Lower the vehicle.
8. Tighten the transaxle brace nuts.
Tighten the nuts to 50 N.m (37 lb ft).