Power Steering Pump Replacement

Power Steering Pump Replacement (LD8)

Removal Procedure




1. Remove the drive belt.
2. Install a drain pan under the vehicle.
3. Disconnect the power steering return hose from the power steering reservoir.




4. Remove the power steering pressure hose from the power steering pump.




5. Remove the power steering pump mounting bolt.




6. Remove the power steering pump from the vehicle.
7. Remove the power steering pulley.
8. Remove the power steering reservoir.

Installation Procedure

1. Install the power steering reservoir.
2. Install the power steering pulley.




3. Install the power steering pump to the vehicle.





Notice: Refer to Fastener Notice.

4. Install the power steering pump mounting bolt.

Tighten the power steering pump mounting bolt to 50 N.m (37 lb ft).




5. Install the power steering pressure hose to the power steering pump.

Tighten the power steering pressure hose to 27 N.m (20 lb ft).




6. Install the power steering return hose to the power steering reservoir.
7. Remove the drain pan from under vehicle.
8. Install the drive belt.
9. Bleed the power steering system.