Radio Antenna Module Replacement

Radio Antenna Module Replacement

Removal Procedure




1. Lower the rear of the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair).
2. Remove the antenna module bolt.
3. Disconnect the antenna module electrical connector.
4. Disconnect the antenna coaxial cable.
5. Disconnect the rear window antenna lead from the rear window antenna connector.
6. Remove the antenna module.

Installation Procedure




1. Connect the rear window antenna lead to the rear window antenna connector.
2. Connect the antenna coaxial cable.
3. Connect the antenna module electrical connector.

Notice: Refer to Fastener Notice (Fastener Notice).

4. Install the antenna module and the antenna module bolt.

Tighten the bolt to 3 N.m (27 lb in).

5. Install the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair).