Engine Mount Strut Bracket Replacement - Left

Engine Mount Strut Bracket Replacement - Left Side

Removal Procedure

1. Remove the left engine mount strut from the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left Side (Service and Repair).
2. Disconnect the positive crankcase ventilation (PCV) tube from the air intake duct.




3. Remove the exhaust crossover pipe nuts (5) and studs (1).




4. Disconnect the engine mount strut bracket bolts from the cylinder head.
5. Remove the left engine mount strut bracket and bolts from the vehicle.

Installation Procedure

1. Install the left engine mount strut bracket and bolts to the vehicle.





Notice: Refer to Fastener Notice (Fastener Notice).

2. Connect the engine mount strut bracket bolts to the cylinder head.

Tighten the engine mount strut bracket bolts to 50 N.m (37 lb ft).




3. Install the exhaust crossover pipe nuts (5) and studs (1).

Tighten the exhaust crossover pipe nuts (5) to 34 N.m (25 lb ft).

4. Connect the PCV tube to the air intake duct.
5. Install the left engine mount strut to the left engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left Side (Service and Repair).