81. Camshaft Cover Assemble

Camshaft Cover Assemble

Tools Required
* J 5590 Bearing and Seal Driver
* J-25254-A Oil Seal Installer

Left Camshaft Cover




1. Install the NEW left spark plug shield tube seals using the J 5590 (1) and J-25254-A (2).




2. Install the NEW left camshaft cover gasket.




3. Install the oil fill cap.





Notice: Refer to Fastener Notice (Fastener Notice).

4. Install the fuel injector sight shield cover ballstud.

Tighten the fuel injector sight shield cover ball stud to 10 N.m (89 lb in).





Important: The camshaft cover bolt insulator must be installed into the camshaft cover bolt hole before installing the camshaft cover bolt.


5. Install the NEW left camshaft cover bolt insulators.

Right Camshaft Cover




1. Install the NEW right spark plug shield tube coil seals using the J 5590 (1) and J-25254-A (2).




2. Install the NEW right camshaft cover gasket.





Important: The camshaft cover bolt insulator must be installed into the camshaft cover bolt hole before installing the camshaft cover bolt.


3. Install the NEW right camshaft cover bolt insulators.