Generator Bracket Replacement (L26, LY7)

Generator Bracket Replacement (L26, LY7)

Removal Procedure

1. Turn the ignition OFF.
2. Remove the generator. Refer to Generator Replacement (L26) ()Generator Replacement (LY7) (Generator Replacement (LY7)).
3. Remove the coolant inlet pipe lower bolt from the generator bracket.
4. Remove the belt tensioner. Refer to Drive Belt Tensioner Replacement (Service and Repair).




5. Remove the generator bracket bolts.
6. Remove the generator bracket.

Installation Procedure




1. Install the generator bracket.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the generator bracket bolts.
Tighten the generator bracket bolts in the sequence shown:

1. Tighten the generator bracket bolts (1) to 50 N.m (37 lb in).
2. Tighten the generator bracket bolts (2) to 50 N.m (37 lb in).
3. Tighten the generator bracket bolt (3) to 23 N.m (17 lb in).

3. Install the belt tensioner. Refer to Drive Belt Tensioner Replacement (Service and Repair).
4. Install the coolant inlet pipe lower bolt from the generator bracket.
5. Install the generator. Refer to Generator Replacement (L26) ()Generator Replacement (LY7) (Generator Replacement (LY7)).