Windshield Washer Hose: Service and Repair

Windshield Washer Hose Replacement

Removal Procedure

1. Open the hood.
2. Remove the right front fender liner. Refer to Front Fender Liner Replacement (Service and Repair).




3. Disconnect the washer hose from the washer pump.
4. Lower the Vehicle.




5. Disconnect the washer hose from the wiper arms.




6. Disconnect the washer hose from the air inlet grille panel.
7. Pull the washer pump hose out from along side the right front inner fender and into the engine compartment.
8. Remove the washer hose from the vehicle.

Installation Procedure




1. Position the washer hose to the vehicle.
2. Route the washer pump hose down along side the right front inner fender and into the front inner fender area.
3. Connect the washer hose to the air inlet grille panel.




4. Connect the washer hose to the wiper arms.




5. Raise the vehicle.
6. Connect the washer hose to the washer pump.
7. Install the right front fender liner. Refer to Front Fender Liner Replacement (Service and Repair).
8. Close the hood.