81. Valve Rocker Arm Cover Installation - Left Side

Valve Rocker Arm Cover Installation - Left Side




1. Install NEW valve rocker arm cover grommets and valve rocker arm cover bolts if they are serviced with the grommet.
2. Install NEW valve rocker arm cover gasket.
3. Install the valve rocker arm cover.

Notice: Refer to Fastener Notice.

4. If reusing bolts that are not fastened to the NEW grommets, apply GM P/N 12345382 (Canadian P/N 10953489) threadlocker or the equivalent to threads and install the valve rocker arm cover bolts.

Tighten the valve rocker arm cover bolts to 10 N.m (89 lb in).




5. Install the engine mount strut upper bracket bolts (1) if applicable.

Tighten the engine mount strut upper bracket bolts (1) to 50 N.m (37 lb ft).

6. Install the engine mount strut bracket and nuts (2), if applicable.

Tighten the engine mount strut bracket and nuts (2) to 50 N.m (37 lb ft).