Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Disconnect the engine harness electrical connector (2) from the oil pressure sensor.




3. Remove the oil pressure sensor.

Installation Procedure





Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the engine oil pressure sensor.

Tighten the sensor to 16 N.m (12 lb ft).




2. Disconnect the engine harness electrical connector (2) to the oil pressure sensor.
3. Lower the vehicle.