4T80-E - Automatic Transaxle

Torque Converter Clutch/Cruise Control Release Switch Replacement

Removal Procedure




1. Remove the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Service and Repair).
2. Rotate the upper switch (1) counterclockwise and remove the switch.
3. Disconnect the upper switch electrical connector.


Installation Procedure





Important: When installing the torque converter clutch/cruise control release switch, ensure that the brake pedal remains in the full up or at rest position.


1. Connect the upper switch (1) electrical connector.
2. Install the upper switch (1) into the upper retainer.
3. Rotate the switch clockwise until fully seated.
4. Adjust the switch. Refer to Torque Converter Clutch/Cruise Control Release Switch Adjustment (4T65-E - Automatic Transaxle).
5. Install the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Service and Repair).