Left Side

Left Side





Notice: Refer to Fastener Notice (Fastener Notice).

1. Tighten the 10 M11 cylinder head bolts.

1. Tighten the bolts (1-10) a first pass in the sequence shown to 30 N.m (22 lb ft).
2. Tighten the bolts a second pass in the sequence shown an additional 70 degrees using the J 45059.
3. Tighten the bolts a third pass in the sequence shown an additional 60 degrees using the J 45059.
4. Tighten the bolts a final pass in the sequence shown an additional 45 degrees (total 175 degrees) using the J 45059.

2. Tighten the 3 M6 bolts cylinder head.

1. Tighten the bolts to 12 N.m (106 lb in).