87. Upper Intake Manifold Installation

Upper Intake Manifold Installation




1. Install the upper intake manifold gasket.
2. Install the upper intake manifold.

Upper:

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the upper intake manifold bolts and studs and tighten the upper intake manifold bolts and studs in sequence to 10 Nm (89 lb in).




4. Install the throttle body gasket.
5. Install the throttle body.
6. Install the throttle body nuts and bolts and tighten to 10 Nm (89 lb in).




7. Install the engine wiring harness heat shield.
8. Install the engine wiring harness heat shield bolt and nut and tighten to 10 Nm (89 lb in).




9. Install the fuel injector rail.
10. Install the fuel injector rail nuts and tighten to 10 Nm (89 lb in).




11. Install the ignition control module assembly.
12. Install the ignition control module assembly bracket nuts and tighten to 50 Nm (37 lb ft).
13. Connect the ignition control module connector to the ignition control module assembly.
14. Install the wiring harness to the fuel rail.
15. Install the spark plug wires to the retaining clips and spark plugs.