Rear Folding Seat Back Cover Replacement

Rear Folding Seat Back Cover Replacement

Removal Procedure

1. Remove the rear seat back. Refer to Rear Seat Back Cushion Replacement (Folding) (Rear Seat Back Cushion Replacement (Folding))Rear Seat Back Cushion Replacement (Non-folding) (Rear Seat Back Cushion Replacement (Non-folding)).
2. Remove the rear seat back bolsters. Refer to Rear Split Folding Seat Back Bolster Replacement (Rear Split Folding Seat Back Bolster Replacement).




3. Remove the pivot bolts (1) from the seat back frame.




4. Remove the left rear seat back from the seat back frame.




5. Remove the right rear seat back from the seat back frame.




6. Unhook the J-hook retainers at the bottom of the rear seat back.
7. Lift up the seat back trim material in order to expose the hidden trim flaps, and remove the staples.




8. Reach inside of the rear seat back cover in order to unfasten the hook and loop retainers that secure the cover to the pad.
9. Remove the folding armrest, if equipped. Refer to Rear Seat Armrest Replacement (Rear Seat Armrest Replacement).




10. Remove the cover from the rear seat back by pulling the cover up and over the pad.

Installation Procedure




1. Install the cover to the rear seat back by pulling the cover down and over the pad.
2. Reach inside of the right rear seat back cover and reposition the release pullstrap through the cover.
3. Align the hook and the loop retainers.




4. Use firm hand pressure in order to fasten the hook and the loop retainers, securing the rear seat back cover to the pad.
5. Install the folding armrest, if equipped. Refer to Rear Seat Armrest Replacement (Rear Seat Armrest Replacement).




6. Reposition the cable on the seat back.
7. Reposition the seat trim flaps.
8. Install new staples to the seat trim flaps.
9. Return the seat back trim material to the original position.




10. Fasten the J-hook retainer at the bottom of the seat back.




11. Install the left rear seat back to the seat back frame.




12. Install the right rear seat back to the seat back frame.





Caution: Refer to Fastener Caution (Fastener Caution).

13. Install the pivot bolts (1) to the seat back frame.

Tighten the bolts to 10 Nm (89 lb in).

14. Install the rear seat back bolsters. Refer to Rear Split Folding Seat Back Bolster Replacement (Rear Split Folding Seat Back Bolster Replacement).
15. Install the seat back. Refer to Rear Seat Back Cushion Replacement (Folding) (Rear Seat Back Cushion Replacement (Folding))Rear Seat Back Cushion Replacement (Non-folding) (Rear Seat Back Cushion Replacement (Non-folding)).