Splash Guard: Service and Repair

Engine Splash Shield Replacement

Special Tools
J 38778 Door Trim Pad Clip Remover
Removal Procedure





1.Use the J 38778 in order to remove the push-in retainers from the engine splash shield.





2.Remove the engine splash shield from the lower flange of the engine compartment side rail.

Installation Procedure





1.Install the engine splash shield to the lower flange of the engine compartment side rail.





2.Align the holes in the engine splash shield to holes in the outboard side engine compartment side rail.

3.Install the push-in retainers to the engine splash shield.