79. Cylinder Head Installation - Left Side

Cylinder Head Installation - Left Side

Special Tools

J 45059 - Angle Meter

For equivalent regional tools, refer to Special Tools (Special Tools).




1. Install the cylinder head gasket. Ensure the arrows point towards the front of the engine. The left cylinder head gasket has the letter L stamped next to the arrow.

Caution: Refer to Special Fastener Caution (Special Fastener Caution).

2. Install the cylinder head.





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install new cylinder head bolts and tighten the cylinder head bolts to 50 Nm (37 lb ft) in sequence. Using J 45059 - meter rotate each cylinder head bolt an additional 120 degrees.