81. Valve Rocker Arm Cover Installation - Right Side

Valve Rocker Arm Cover Installation - Right Side




1. Install NEW valve rocker arm cover grommets and use NEW valve rocker arm cover bolts if they are serviced with the grommet.
2. Install NEW valve rocker arm cover gasket.
3. Install the valve rocker arm cover.

Caution: Refer to Fastener Caution (Fastener Caution).

4. If reusing bolts that are not fastened to the NEW grommets, apply GM P/N 12345382 (Canadian P/N 10953489) threadlocker or the equivalent to threads and install the valve rocker arm cover bolts and tighten to 10 Nm (89 lb in).