Remote Control Door Lock Receiver Programming and Setup

Remote Control Door Lock Receiver Programming and Setup

Remote Control Door Lock Receiver Replacement

If the remote control door lock receiver is replaced, the following procedures must be performed:

1. RCDLR Setup:

1. Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
2. Select Setup New RCDLR.
3. Follow the on-screen instructions.

2. Keyless Entry Transmitter Programming - Refer to Remote Control Door Lock Transmitter Programming (Programming and Relearning).
3. Tire Type Setup:

1. Install a scan tool
2. Select Remote Control Door Lock Receiver Module Setup in the Body menu.
3. Select Tire Type/Pressure Selection.
4. Follow the on-screen instructions.

4. Tire Pressure Monitoring Sensor Learn - Refer to Tire Pressure Indicator Sensor Learn (Programming and Relearning).