58. Engine Coolant Air Bleed Pipe and Hole Cover Cleaning and Inspection

Engine Coolant Air Bleed Pipe and Hole Cover Cleaning and Inspection





Note: Do not use the engine coolant air bleed pipe and cover gaskets again. Upon installation of the pipe and covers, install NEW gaskets.

1. Remove the seals (308) from the pipe and covers.




2. Clean the pipe (307) and covers in solvent.
Warning: Refer to Safety Glasses Warning (Safety Glasses Warning).

3. Dry the pipe (307) and covers with compressed air.
4. Inspect the pipe and covers for damaged sealing surfaces or restrictions within the pipe.
5. Inspect the hose (311) for wear, restrictions, or damage.