Horn: Service and Repair

Horn Replacement

Removal Procedure




1. Open the hood.
2. Remove the RH headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Service and Repair).
3. Disconnect the horn electrical connector.




4. Remove the horn bracket bolt.
5. Remove the horn from the frame rail extension.

Installation Procedure




1. Position the horn assembly to the frame rail extension. Insert the horn anti-rotation tab into the slot on the frame rail.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the horn bracket bolt.

Tighten the bolt to 15 Nm (11 lb ft).




3. Connect the horn electrical connector.
4. Install the RH headlamp assembly. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Service and Repair).
5. Close the hood.