Vehicle Speed Sensor Assemble

Vehicle Speed Sensor Assemble





Note: Handle the vehicle speed sensor assembly carefully.

1. Inspect the vehicle speed sensor assembly (10) and the vehicle speed sensor O-ring seal (11) for the following conditions:

* Damaged connector
* Cracked housing
* Signs of rotor damage
* Cuts or nicks on the O-ring seal

2. Install a new O-ring seal (11) on the vehicle speed sensor assembly (10).




3. Install the vehicle speed sensor assembly (10) into the case extension.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the vehicle speed sensor bolt (9) and tighten to 12 Nm (106 lb in).