Timing Components: Specifications

TIMING CHAIN TENSIONER

Timing Chain Tensioner Bolt 21 Nm (15 lb ft)

CRANKSHAFT PULLEY

Crankshaft Balancer Bolt
Installation Pass Using the Old Bolt to Ensure the Balancer is Completely Installed 125 Nm (92 lb ft)
First Pass - Install a NEW Bolt After the Installation Pass and Tighten as Described in the First and Final Passes 125 Nm (92 lb ft)
Final Pass 130 degrees

ENGINE FRONT COVER (TIMING COVER)

Engine Front Cover Bolt 25 Nm (18 lb ft)