Torque Converter Assemble

Torque Converter Assemble

Special Tools

J-36850 - Assembly Lubricant or equivalent

For equivalent regional tools, refer to Special Tools (Tools and Equipment).




1. Apply J-36850 - lubricant or equivalent to a new turbine shaft O-ring seal (520).
2. Apply J-36850 - lubricant or equivalent to the turbine shaft (518) splines.
3. Install the turbine shaft O-ring seal (520) onto the turbine shaft (518).





Warning

The torque converter weighs approximately 35 lbs. Personal injury may result if you lift the torque converter improperly.

4. Install the torque converter assembly (1).