Vehicle Speed Sensor and Transmission Fluid Cooler Pipe Fitting Installation

Vehicle Speed Sensor and Transmission Fluid Cooler Pipe Fitting Installation




1. Inspect the output speed sensor (130) for damage or a cut seal (4).
2. Inspect the cooler connector (3) for damaged threads, clogging, or a cut seal (4).




3. Install the output speed sensor (130) and the seal (4).

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the output speed sensor bolt (131) and tighten to 8-14 Nm (6-10 lb ft).
5. Install the cooler fitting (3) and the new seal (4) or fitting (38) and seal (39) into the case.
6. Tighten the cooler fitting to 25-29 Nm (19-21 lb ft).