Idler Gear Shaft Front Seal Removal

Idler Gear Shaft Front Seal Removal

Special Tools
* DT 599 - Bearing Puller
* DT 8390270 - Sliding Hammer
* DT 8792319 - Adapter

For equivalent regional tools, refer to Special Tools (Special Tools).




1. Remove the transfer case idler gear shaft (2) with DT 8390270 - sliding hammer (1), DT 8792319 - adapter, and DT 599 - bearing puller in direction of arrow.
2. Remove the crown wheel (3) from the transfer case.




3. Remove the transfer case idler gear shaft front seal (1).