67. Engine Flywheel Installation

Engine Flywheel Installation

Special Tools
* EN-38122-A - Crankshaft Balancer Holder
* EN-43653 - Flywheel Holding Tool
* EN-45059 - Angle Meter

For equivalent regional tools, refer to Special Tools (Special Tools).




1. Install the flywheel.
2. Install NEW bolts.

Caution: Refer to Fastener Caution (Fastener Caution).

Note: EN-43653 - flywheel holding tool may be used instead of EN-38122-A - holder in order to prevent crankshaft rotation.

3. Holding the crankshaft balancer with EN-38122-A - holder, tighten the bolts evenly. Tighten the bolts to 53 Nm (39 lb ft), plus 25 degrees using the EN-45059 - meter