Starter Noise Diagnosis
Starter Noise Diagnosis
Circuit/System Testing
1. Remove the flywheel inspection cover.
2. Inspect the flywheel for the following:
* Loose flywheel bolts
* Chipped gear teeth
* Missing gear teeth
* Bent flywheel
• If not within specifications, secure the flywheel bolts or replace the flywheel.
• If all inspections were within specification, replace the starter motor.
Repair Instructions
* Fastener Tightening Specifications (Fastener Tightening Specifications) Fastener tightening for the 2.2L and 2.4L engine
* Engine Flywheel Removal () Engine flywheel replacement for the 2.2L and 2.4L engine
* Fastener Tightening Specifications (Fastener Tightening Specifications) Fastener tightening spec for the 2.8L,3.0L,3.2L,3.6L engine
* Engine Flywheel Removal () Engine flywheel replacement for the 2.8L,3.0L,3.2L,3.6L engine
* Starter Replacement (V6) (Service and Repair)Starter Replacement (L4) (Service and Repair)