Front Wheel Drive Intermediate Shaft Installation

Front Wheel Drive Intermediate Shaft Installation

Special Tools
* DT-113-2 - Bracket
* DT-622-A - Adapter
* DT-49103 - Fitting Drift
* DT-49104 - Protective Collar

For equivalent regional tools, refer to Special Tools (Tools and Equipment).




1. Install the DT-49104 - protective collar (1) to the intermediate shaft (2), and install the intermediate shaft (2) using the DT-49103 - fitting drift (3) and a rubber mallet.
2. Remove the DT-49104 - protective collar and apply grease to the splines of the shaft. Refer to Adhesives, Fluids, Lubricants, and Sealers (Adhesives, Fluids, Lubricants, and Sealers) for the recommended grease.




3. Install the transfer case intermediate shaft retaining ring (1).




4. Remove the transfer case (3) from DT-622-A - adapter (2) and DT-113-2 - bracket (1).