38. Forward Clutch Support Stud Installation

Forward Clutch Support Stud Installation




1. Rotate the forward and coast clutch support (822) counterclockwise against the spline. Do this by tapping on the support in a counterclockwise direction against the splines.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the forward clutch support studs (5). First tighten the stud closest to the bench (or the rear of the vehicle) to 25-27 Nm (19-20 lb ft). Then tighten the second stud to 25-27 Nm (19-20 lb ft).