68. Engine Flywheel Installation (Automatic Transmission)

Engine Flywheel Installation (Automatic Transmission)

Special Tools

* EN-43653 - Flywheel Holding Tool

* EN-45059 - Angle Meter

For equivalent regional tools, refer to Special Tools (LDK, LHU) Special Tools (LDK, LHU).





1. Install the flywheel (1) for automatic transmission.

2. Install the NEW bolts.

3. Install EN-43653 - flywheel holding tool in the starter assembly location, engaging the flywheel, in order to prevent crankshaft rotation.

4. Tighten the flywheel bolts to 53 Nm (39 lb ft) plus 25 degreesusing the EN-45059 - angle meter.

5. Remove EN-43653 - flywheel holding tool.