Manual Transmission Shift Lever and Selector Lever Cable Replacement
Manual Transmission Shift Lever and Selector Lever Cable Replacement
Removal Procedure
1. Remove the battery tray. Refer to Battery Tray Replacement Service and Repair.
2. Remove the shift lever and selector lever cable (2) from the transmission control housing (3).
3. Remove the shift lever and selector lever cable from the shift lever and selector lever cable bracket (1) by pushing back locking rings in counter driving direction.
4. Remove the shift lever and selector lever cable grommet (1) from the bulkhead.
5. Remove the front floor console. Refer to Front Floor Console Replacement Front Floor Console Replacement.
6. Unlock the shift lever and selector lever cable adjust locks (2).
7. Clip the shift lever and selector lever cable (3) out of the transmission control lever housing (1).
Installation Procedure
Note:
Do not lock yet.
1. Slide the shift lever and selector lever cable into the shift lever and selector lever cable adjust locks (2).
2. Clip the shift lever and selector lever cable (3) into the transmission control lever housing (1).
3. Install shift lever and selector lever cable from inside the vehicle.
Note:
Install the guide with the white marking upwards to the bulkhead. Do not cross the cables.
4. Install the shift lever and selector lever cable grommet (1) to the bulkhead.
5. Check for correct fit.
6. Install the shift lever and selector lever cable (2) to the shift lever and selector lever cable bracket (1).
7. Install the shift lever and selector lever cable to the transmission control housing (3).
8. Install the battery tray. Refer to Battery Tray Replacement Service and Repair.
9. Adjust the shift lever and selector lever cable. Refer to Manual Transmission Shift Lever and Selector Lever Cable Adjustment Manual Transmission Shift Lever and Selector Lever Cable Adjustment.
10. Install the front floor console. Refer to Front Floor Console Replacement Front Floor Console Replacement.