19. Engine Block Disassemble

Engine Block Disassemble





1. Remove the engine block coolant drain plug.

2. Remove the oil flow check valve.

3. Remove the rear oil passage plugs (3).

4. Remove the 3 oil passage plugs on each side of the block (2).

5. Remove the 2 water passage plugs on the top of the block (1).

6. Remove the 2 front oil passage plugs.





7. Remove the knock sensor (1) and bolt.





8. Remove the oil pressure switch (2).

9. Remove the crankshaft position (CKP) sensor (1) and bolt.





10. If equipped, loosen the piston oil nozzle assembly (1) bolt and remove the piston oil nozzle assembly.