Battery Cooling Air Inlet Duct Replacement

Battery Cooling Air Inlet Duct Replacement

Removal Procedure

1. Disable the hybrid battery. Refer to High Voltage Disabling High Voltage Disabling.





2. Remove the drive motor battery cooling air inlet upper duct retainers (1). Refer to Drive Motor Battery Cooling Air Inlet Upper Duct Replacement Drive Motor Battery Cooling Air Inlet Upper Duct Replacement.





Note:
Do not insert fingers into the vent area.

3. Detach the battery cooling air inlet ducts (1) by using a suitable pry tool on the outside.

Installation Procedure





Note:
Do not insert fingers into the vent area.

1. Attach the battery cooling air inlet ducts (1) into the slotted receivers.





2. Install the drive motor battery cooling air inlet upper duct into the slots with the retainers (1). Refer to Drive Motor Battery Cooling Air Inlet Upper Duct Replacement Drive Motor Battery Cooling Air Inlet Upper Duct Replacement.

Note:
Make sure the duct is flush against the cover.

3. Enable the hybrid battery. Refer to High Voltage Enabling High Voltage Enabling.