Transmission Fluid Drain and Fill

Transmission Fluid Drain and Fill

Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Remove the fluid drain plug (1).

3. Drain transmission fluid into a suitable container.

Caution:
Refer to Fastener Caution Fastener Caution.

4. Install the fluid drain plug (1) and tighten to 12 Nm (106 lb in).

Installation Procedure





1. Lower the vehicle.

2. Remove the fluid fill cap (1).

3. Fill the transmission to the proper level with the correct fluid. Refer to Transmission Fluid Level and Condition Check Transmission Fluid Level and Condition Check and Fluid Capacity Specifications (6T40/45/50) Capacity Specifications.

4. Install the fluid fill cap (1).