Overhaul

Transmission Fluid Level Inspection

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Place basin underneath.

3. Clean away all dirt and debris from transmission oil drain plug area.





Note:
Discard transmission oil drain plug.

4. Remove transmission oil drain plug (1).

Installation Procedure

Caution:
Refer to Fastener Caution Fastener Caution.

1. Install NEW transmission oil drain plug and tighten to 50 Nm (37 lb ft).

2. Lower vehicle.

3. Remove battery tray. Refer to Battery Tray Replacement Service and Repair.

4. Clean away all dirt and debris from transmission oil filler plug area.





5. Remove transmission oil filler plug (1).

6. Add transmission fluid. For transmission fluid capacity, refer to Manual Transmission Specifications Manual Transmission Specifications.

7. Install NEW transmission oil filler plug and tighten to 30 Nm (22 lb ft).

8. Install battery tray. Refer to Battery Tray Replacement Service and Repair.