Water Pump Cover Replacement

Water Pump Cover Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Standard) Service and Repair.

2. Remove the front wheelhouse liner right side.

3. Remove the front compartment insulator.




4. Remove the 4 water pump cover bolts (1) and the water pump cover (2) along with the gasket (3).

Installation Procedure





Caution: Refer to Fastener Caution Fastener Caution.

Note: Use a NEW water pump cover gasket (3).

1. Install the water pump cover (2) and the 4 water pump bolts (1) and tighten to 10 Nm (89 lb in).

2. Install the front compartment insulator.


3. Install the front wheelhouse liner right side.

4. Lower the vehicle.