Procedures
FUEL FILLER DOOR REPLACEMENTREMOVAL PROCEDURE
1. Open the fuel filler door.
2. Remove the screws from the fuel filler door.
3. Remove the push-pin retainer from the fuel filler door.
4. Reposition the filler neck assembly to the right.
5. Remove the screws from the fuel filler door.
6. Remove the fuel filler door.
INSTALLATION PROCEDURE
1. Position the fuel filler door to the quarter panel.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws to the fuel filler door.
Tighten
Tighten the screws to 9 N.m (80 lb in).
3. Reposition the fuel filler neck.
4. Install the screws to the fuel filler neck.
Tighten
Tighten the screws to 9 N.m (80 lb in).
5. Inspect the alignment of the fuel filler door