Latch Replacement - Door (Cargo Door Lower)

REMOVAL PROCEDURE




1. Remove the bolts that retain the latch assembly to the door.
2. Disconnect electrical connector, if required.
3. Remove the actuator cable assembly from the latch.

INSTALLATION PROCEDURE




1. Install the actuator cable assembly to the latch.
2. Connect electrical connector, if required.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the bolts that retain the latch assembly to the door.

Tighten
Tighten the bolts to 25 N.m (18 lb ft).