Operation CHARM: Car repair manuals for everyone.

Latch Replacement - Door (Cargo Door Upper)

REMOVAL PROCEDURE




1. Remove the door trim panel.
2. Remove the bolts that retain the latch to the door.
3. Remove latch from the door.
4. Remove the actuator cable assembly from the latch.
5. Remove the latch bolts.
6. Remove the latch from the door.

INSTALLATION PROCEDURE




1. Install the actuator cable assembly to the latch.
2. Install the latch assembly.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Loose assemble the bottom 2 bolts.
3.1. Close door to sell adjust latch assembly.

Tighten
Tighten bolts to 9 N.m (80 lb in).

3.2. Open the door.
3.3. Install the upper bolt.

Tighten
Tighten the bolt to 9 N.m (80 lb in).

4. Install the door trim panel.