Bezel Replacement - Floor Console (Luxury)

Bezel Replacement - Floor Console (Luxury)

Removal Procedure




1. Remove the floor console upper bezel by firmly pulling on the corners.

Important: The ashtray lid and cupholder lid must be in the open position.




2. Open the ashtray lid (1) and cupholder lid (2)
3. Open the center console storage lid.
4. Gently pull on the front part of the bezel to release the retainers.
5. Pull out the bezel partially to gain access to the wire connectors.
6. Disconnect the wire connectors.
7. Remove the lower bezel from the center console.

Installation Procedure

Important: The ashtray lid (1) and cupholder lid (2) must be in the open position.




1. Open the ashtray lid (1) and cupholder lid (2).
2. Partially install the bezel.
3. Connect the electrical connectors.
4. Install the lower bezel to the console.
5. Push on the corners until the retainers are fully seated in place.




6. Align the locating pins (1) on the upper bezel.
7. Press in on the bezel until all retaining clips are fully seated.