Lock Cylinder Replace - Console Compartment Door

Lock Cylinder Replace - Console Compartment Door

Removal Procedure

1. Remove the console compartment door from the center console.
2. Place the compartment door on a work bench.




3. Remove the 11 retaining screws.
4. Remove the inside panel to gain access to the lock cylinder.




5. Remove the lock cylinder retaining clip (1) from the latch assembly.
6. Remove the lock cylinder from the latch assembly by pressing outwards.

Installation Procedure




1. Install a new lock cylinder (2) by pressing inwards until it is seated.
2. Install the retaining clip (1).
3. Ensure the linkage for the top compartment door are all connected before installing the inside panel.
4. Install the inside panel.





Notice: Refer to Fastener Notice in Service Precautions.

5. Install the 11 screws.

Tighten the screws to 1.6 N.m (14 lb in)

6. Inspect the operation of the top compartment door.
7. Install the compartment door to the console.