12 Volt Power Supply Replacement
TOOLS REQUIREDJ 42059 Cigarette Lighter Socket Remover
REMOVAL PROCEDURE
1. Remove the power supply fuse.
2. Lift up the front cover of the socket.
3. Insert the J42059 into the socket sleeve. Tilt the tool so that the tool fits into the slots on the sides of the socket sleeve.
4. Hold the plastic ring in place. Pull the socket gently out of the assembly in order to remove the outlet.
5. Remove the electrical connector from the socket.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the socket.
2. Insert the plastic ring into the opening and snap the plastic ring into place.
3. Insert the socket through the plastic ring gently by hand until the socket ring is sealed.
4. Install the power supply fuse.