Instrument Panel (IP) - Air Deflector/Louver - Left

REMOVAL PROCEDURE




1. Remove the instrument panel (IP) bezel.
2. Remove the air deflector louver housing from the IP by prying it out.
3. Disconnect the electrical connectors.
4. Remove the air deflector louver screws.
5. Remove the air deflector louver from the housing.

INSTALLATION PROCEDURE




1. Install the air deflector to the housing.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the retaining screws.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).

3. Connect the electrical connectors.
4. Install the air deflector louver assembly to the IP.
5. Install the instrument panel (IP) bezel.