Sunroof / Moonroof: Adjustments

SUNROOF GLASS HEIGHT AND OPENING FIT ADJUSTMENT




1. In order to adjust the glass height, the sunroof glass must be in the zero (closed) position.

IMPORTANT: Do not remove the screws from the sunroof mechanism.

2. Loosen the 4 adjustment screws

NOTE: Refer to Fastener Notice in Service Precautions.

3. Adjust the rear glass panel (1) so that it is flush with the roof panel (3), (0-2.0 mm (0.079 in) above 3).

Tighten
Tighten all 4 adjustment screws to 7 N.m (62 lb in).

4. Adjust the front glass panel (2) so that it is flush with the roof panel (3), (0-2.0 mm (0.079 in) below 3).

Tighten
Tighten all 4 adjustment screws to 7 N.m (62 lb in).