Weatherstrip Replacement - Front Door Window

REMOVAL PROCEDURE




1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the window.
4. Remove the screws.
5. Pull the weatherstrip from the following locations:
^ The front of the glass run channel
^ The top of the window frame flange
^ The rear of the glass run channel
6. Remove the weatherstrip from the door.

INSTALLATION PROCEDURE




1. Install the weatherstrip to the following locations:
^ The front of the glass run channel
^ The top of the window frame flange
^ The rear of the glass run channel

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the bolts.

Tighten
Tighten the bolts to 6 N.m (53 lb in).

3. Install the window.
4. Install the water deflector.
5. Install the door trim panel.
6. Inspect the operation of the window.