Driver Information Center Replacement

REMOVAL PROCEDURE




1. Remove the floor console upper bezel by firmly grabbing and pulling outwards.




2. Insert a flat bladed tool at the edge (1) of the DIC in order to pry out the DIC.
3. Disconnect the electrical connector from the DIC.
4. Remove the DIC from the console.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the DIC.
2. Install the DIC in the opening until the unit clicks into place.




3. Align the locating pins (1).
4. Install the upper bezel by pushing on the bezel until the unit is fully seated.